Canon MP980 series On-Screen Manual page 7

Main Components
(23)
Print Head Holder
Install the Print Head.
(24)
Scanning Unit (Cover)
Scans originals. Open it to replace ink tanks, to check ink lamps, or to remove jammed paper inside the
machine. When opening the Scanning Unit (Cover), lift it with the Document Cover closed.
(25) Inner Cover
Close it when printing on paper.
(26) Card Slot
Insert a memory card.
Inserting the Memory Card
See
(27) Access lamp
Lights or flashes to indicate the memory card status.
Inserting the Memory Card
See
Note
For details on installing the Print Head and ink tanks, refer to the printed manual: Getting
Started .
Operation Panel
ON button
(1)
Turns the power on or off. Before turning on the power, make sure that the Document Cover is closed.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
the Power lamp is not lit. If the power plug is disconnected from the wall outlet while the
Power lamp is lit or flashing, the machine may become unable to print properly since the
Print Head is not protected.
(2) Buttons to use when navigating menus on the LCD
See How to Navigate Menus on the LCD
(3) Black button
Starts black & white copying, scanning, etc.
(4) Color button
Starts color printing, copying, or scanning.
(5) Stop button
Cancels operation when a print job is in progress.
(6) Alarm lamp
Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
(7) [+] [-] buttons
Specifies the number of copies to copy or print.
.
.
.
Page 7 of 947 pages