Canon MP980 series On-Screen Manual page 677

Printing from Printed Photo
> Printing on DVD/CDs
Advanced Guide
Printing from Printed Photo
Print an image on a printed photo onto a printable DVD/CD.
Important
You cannot print on 8 cm DVD/CDs.
Note
If printing is misaligned, adjust the printing position. For information on how to adjust it, see
Adjusting the Print Area
1.
Make sure that the machine is turned on.
2.
DVD/CD label print on the HOME screen, then press the OK button.
Select
3.
Select From printed photo, then press the OK button.
The print area setting screen is displayed.
4.
Use the or button to select Outer circle or Inner circle and use the
button to change the print area.
5.
Press the OK button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and
make sure you set a value smaller than the measured value for the outer diameter, and a value
larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
6.
Use the or
button to select Recommended DVD/CD or Other DVD/CD, then
press the OK button.
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the
suitable density printing. If not, specify Other DVD/CD.
7.
Load the photos on the Platen Glass.
OK
Press the button to scan the photos.
Important
Do not see the light source directly while scanning is in progress.
8.
Use the or
Note
If
appears on the preview screen, the photos may be not scanned properly. Press the
Back button, then repeat the procedure from step 7.
9.
Confirm the print image on the DVD/CD, then press the OK button.
Note
Other options
> Printing on the Label Side of DVD/CDs
.
button to select the photo to print, then press the
> Printing from Printed Photo
or
button.
OK
Page 677 of 947 pages