Canon MP980 series On-Screen Manual page 675

Printing from Photo Data
> Printing on DVD/CDs
Advanced Guide
Printing from Photo Data
Print an image on a memory card onto a printable DVD/CD.
Important
You cannot print on 8 cm DVD/CDs.
Note
If printing is misaligned, adjust the printing position. For information on how to adjust it, see
Adjusting the Print Area
1.
Make sure that the machine is turned on.
2.
DVD/CD label print on the HOME screen, then press the OK button.
Select
3.
From photo data, then press the
Select
4.
Confirm the message, then insert the memory card into the Card Slot.
The print area setting screen is displayed.
5.
Use the or button to select Outer circle or Inner circle and use the
button to change the print area.
6.
Press the OK button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and
make sure you set a value smaller than the measured value for the outer diameter, and a value
larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
7.
Use the or button to select Recommended DVD/CD or Other DVD/CD, then
press the OK button.
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the
suitable density printing. If not, specify Other DVD/CD.
8.
Use the or
9.
Confirm the print image on the DVD/CD, then press the OK button.
Note
Other options
Printing a Specified Area (Trimming)
Searching for Photos with the Shooting Date (Search)
10.
Check the print settings, then press the OK button.
The message for preparation is displayed.
Note
To change print settings, press the Back button repeatedly until the screen for the setting item
> Printing on the Label Side of DVD/CDs
.
button to select the photo to print, then press the
> Printing from Photo Data
button.
OK
OK button.
Page 675 of 947 pages
or