Easy Setup Instructions For Apple AirPort
These instructions are for setting up your PIXMA machine on an Apple AirPort wireless network in a Mac OS X environment. For all other environments, including USB
connections, wired networks, non-AirPort wireless networks, and all Windows installations, please use the Getting Started Guide. Also for setting up additional computers on
your network to access the machine, refer to the Getting Started Guide.
Before starting, please locate and write down the your network name and password. Since Apple recommends using the WPA/WPA2 encryption method for AirPort networks,
these instructions are for configuring the machine on WPA/WPA2 encrypted networks.
Network Name (also called SSID):
Unpack the machine and prepare the hardware for use by following chapters 1 to 5 of the Getting Started Guide.
Connect one end of the USB cable to the computer
and the other to the machine.
Make sure the machine is turned on.
Enter your administrator name and password.
If you do not know your administrator name or password,
click Help, then follow the on-screen instructions.
Follow on-screen instructions.
Network password (if applicable):
Hardware Se tup
Driver/Software Insta ll
Turn on the computer, then insert the Setup
CD-ROM into the CD-ROM drive.
Click Easy Install.
The drivers, application software, and on-screen
manuals are installed automatically.
If the registration screen appears, follow the on-screen
instructions to register your product. You will need your
product serial number which is located on the packaging,
or, on the inside lower part of the machine.
* * * * * * *
* * * * * * *
Double-click the Setup icon.
If the CD-ROM folder does not open automatically,
double-click the CANON_IJ icon on the desktop.
When the computer restarts, Canon IJ Network Tool starts
Click Restart to restart the computer.
After restarting the computer, remove the Setup CD-ROM
and keep it in a safe place.