Printing A Specified Area (Trimming) - Canon MP980 series On-Screen Manual

Printing a Specified Area (Trimming)

> Printing Using the Operation Panel of the Machine
Advanced Guide
> Printing a Specified Area (Trimming)
Display Functions
Printing a Specified Area (Trimming)
You can edit images displayed on the LCD by cropping them.
Note
Crop images after specifying the page size, media type, and bordered or borderless printing in the
print settings screen. If you change the paper settings after cropping, the cropped area may be
adjusted to match the paper, or be disabled completely.
1.
Select the photo to crop.
2.
Press the right Function button when Edit is displayed on the screen.
3.
Select Trimming, then press the OK button.
The cropping edit screen is displayed.
4.
Choose the area to print.
, , , and
Position the cropping frame.
Easy-Scroll Wheel:
Sets the cropping frame size.
Turn the Easy-Scroll Wheel clockwise to enlarge the size of the cropping frame or counterclockwise
to reduce it.
Left Function button:
Changes the aspect ratio of the cropping frame.
Right Function button:
Rotates the cropping frame.
To switch the cropping frame between portrait and landscape orientations, press this button.
5.
Press the OK button to finalize your selection of cropping area.
The area to be cropped is specified, and the original photo is displayed.
Note
The cropped image cannot be newly saved on the memory card.
The cropping area is displayed only for photos which have been cropped.
To change the cropped area once it has been set, press the right Function button again when
Edit is displayed on the screen, select Trimming, then press the
To cancel cropping after cropping has been set, press the right Function button again when
Edit is displayed on the screen, select Cancel trimming, then press the
Displayed images only or All images, then press the
buttons:
> Printing from a Memory Card >
OK button.
OK button. Select
OK button.
Page 395 of 947 pages
Using Useful
Page top