Canon MP980 series On-Screen Manual page 763

Changing the Machine Settings on the LCD
Note
When you set WSD setting to Active, the printer icon is displayed on the Network Explorer
in Windows Vista.
Reset LAN settings
Initializes the network settings on the machine.
Important
Note that initialization erases all connection settings with computers, and printing or
scanning operation may become impossible. To use the machine over network, refer to
your setup manual. Be careful when you initialize the network settings on the machine.
Note
When you initialize the network settings using the Canon IJ Network Tool, refer to
Initializing the Network Settings of the Machine
Advanced settings
Date display
Changes the display format of shooting dates when printed.
Note
When Date ON is selected on the advanced print settings screen in memory card mode,
the shooting date is printed in the date display format you selected. For print settings,
see
Setting Items
The shooting date format is as specified in the DPOF setting from DPOF printing.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
Remove the memory card before changing this setting. For details, see
Card Slot as the Memory Card Drive of the Computer
If you set this setting to Writable from USB PC or Writable from LAN PC, card direct
printing cannot be done. After you finish operation of the memory card dedicated drive, be
sure to set it back to Not writable from PC. When you turn off the machine, Writable from
USB PC or Writable from LAN PC will be canceled and the setting is returned to Not
writable from PC when you turn on the machine next time.
Power save setting
The machine enters the Power save mode if not operated for a certain time interval*. In the
Power save mode, the FAU lamp is turned off to reduce the power consumption of the
machine.
* You can set the wait time before the FAU lamp is turned off. Select from 5 minutes, 15
minutes, 1 hour, and 4 hours. The default setting is 15 minutes. If you scan films frequently, it
is recommended to set the longer time interval (1 hour or 4 hours).
Note
The machine enters the Power save mode if no operation is performed for the time
interval set in Power save setting. The lamp inside the Platen Glass and the FAU lamp
are turned off, then the machine is on standby.
Press any button except for the ON button or perform printing to restore the machine.
Slide show setting
Specifies the image display quality of the slide show.
Note
When Image quality: Standard is selected, images are displayed at about 5-second
intervals. When Image quality: High is selected, images are displayed at different time
intervals according to their resolutions.
Quiet mode
.
.
Setting Up the
.
Page 763 of 947 pages