Changing The Settings In The Admin Password Sheet - Canon MP980 series On-Screen Manual

Changing the Settings in the Admin Password Sheet

>
Advanced Guide About Network Communication
in the Admin Password Sheet
Changing the Settings in the Admin Password Sheet
1.
Start up the Canon IJ Network Tool.
Starting up Canon IJ Network Tool
2.
Select the printer in Printers.
3.
Select Configuration from the Settings menu.
4.
Click the Admin Password tab.
1. Use admin password
Set a password for the administrator with privileges to set up and change detailed options. To
use this feature, select this check box and enter a password.
Important
The password should consist of alphanumeric characters and be no longer than 32
characters. The password is case-sensitive. Do not forget the password you set.
2.
Password
Enter the password to set.
3. Password Confirmation
Enter the password again for confirmation.
5.
Click OK.
A dialog box is displayed asking you for confirmation before the settings are sent to the printer. If you
click Yes, the settings are sent to the printer and the Transmitted Settings dialog box is displayed.
>
Changing and Confirming Network Settings
Page 910 of 947 pages
> Changing the Settings
Page top