Canon MP980 series On-Screen Manual page 644

Scan Tab
Important
This setting is not applied when scanning with the ScanGear (scanner driver) screen displayed.
Advanced Mode Settings
If Select Source is film, select the Enable 48/16 bit Output checkbox to display Color(48bit) and
Grayscale(16bit) in Color Mode on the Advanced Mode tab. This checkbox is not selected by default.
Note
When Color(48bit) or Grayscale(16bit) is selected for Color Mode, deselecting this checkbox
changes Color(48bit) to Color and Grayscale(16bit) to Grayscale.
Some applications cannot receive images scanned in Color(48bit) or Grayscale(16bit), or may
close when such images are received.
Page 644 of 947 pages
Page top