Bluetooth Settings; Pictbridge Print Settings; Language Selection; Reset Setting - Canon MP980 series On-Screen Manual

Machine Settings
Read/write attribute
Selects whether to use the Card Slot of the machine as the memory card drive of a computer.
Power save setting
Selects the length of wait time until the machine enters the Power save mode.
The machine enters the Power save mode if not operated for a certain time interval. In the Power
save mode, the FAU (Film Adapter Unit) lamp is turned off to reduce the power consumption of the
machine.
The default setting is 15 minutes.
Slide show setting
Selects the image display quality of the slide show.
Quiet mode
Enables this function if you want to reduce the operating noise of the machine, such as when using
the machine at night (when copying, printing from the memory card, printing from the PictBridge
compliant device, printing with wireless communication, etc.).
Guide display settings
Changes the time interval before the guide display, such as Change set. and Copy, appears at the
top of the LCD, or hides the guide display.
Key repeat
Enables to increase or decrease numbers rapidly by pressing and holding down the button when
inputting numbers. When this setting is disabled, holding down the button is the same as pressing
it once.
Mobile phone print setting
Specifies paper, layout, etc. when you print from the wireless communication device.

Bluetooth settings

Changes the Bluetooth settings, such as the device name or passkey. This setting appears only
when the optional Bluetooth Unit is connected to the machine.

PictBridge print settings

Specifies paper, print quality, etc. when you print from the PictBridge compliant device.

Language selection

Changes the language for LCD messages and menus.

Reset setting

Sets the machine settings back to the default, except for the LCD language and the adjustment
values of the print head position.
Page 70 of 947 pages
Page top