Canon MP980 series On-Screen Manual page 39

Printing Photos from a Film
Squeeze the indentations of the Film Holder (A) inward to lift it to open, and
(1)
squeeze the indentations area (B) same as Film Holder inward to remove it from
the Film Guide (C).
Align the Film Guide with the grooves on the right and left sides of the Platen
(2)
Glass.
INVERT THE SLIDES (with the side showing the correct image facing down),
(3)
and mount the inverted images UPSIDE DOWN so that the frame order runs
FROM LEFT TO RIGHT.
Make sure that the slides are in close contact with the Film Guide.
Removing the Film
Remove the film from the Film Guide, and store the Film Guide onto the Document Cover.
1.
Remove the film.
Open the Document Cover to remove the Film Guide.
(1)
Remove the film from the Film Guide and close the Film Holder completely.
(2)
For slides, align the alignment marks
Film Guide, and insert the tabs on the leading edge of the Film Strip Frame into the Film Guide. Then close the
Film Holder completely.
(A) on the Film Strip Frame with the alignment marks
Page 39 of 947 pages
(A) on the