Canon MP980 series On-Screen Manual page 667

Attaching/Removing the CD-R Tray
> Printing on DVD/CDs
Advanced Guide
Attaching/Removing the CD-R Tray
The external appearance may differ depending on the machine you are using.
Attaching the CD-R Tray
1.
Open the Paper Output Tray (A), then open the Inner Cover (B).
2.
Place the DVD/CD.
Important
Make sure that there is no dirt on the CD-R Tray before placing the DVD/CD on the CD-R
Tray.
When placing the DVD/CD on the CD-R Tray, do not touch the printing surface of the disc
or the reflectors (C) on the CD-R Tray.
When printing on an 8 cm DVD/CD, attach the supplied 8 cm CD-R Adapter. If you do not,
printing quality will be reduced and the DVD/CD may become damaged.
12 cm DVD/CD:
1. Place the disc on the CD-R Tray with the printable surface facing up.
Do not touch the reflectors (C).
8 cm DVD/CD:
1. Align the protrusions on both edge of the 8 cm CD-R Adapter with indentations on
the CD-R Tray.
> Printing on the Label Side of DVD/CDs > Attaching/Removing the CD-R Tray
Page 667 of 947 pages