Canon MP980 series On-Screen Manual page 671

Printing on the Label Side of DVD/CDs
> Printing on DVD/CDs
Advanced Guide
Printing on the Label Side of DVD/CDs
The CD-R Tray (supplied) allows the printing of images on printable DVD/CDs.
This section describes how to print scanned photos or images on printable DVD/CDs.
Note
We recommend that you test print on an unneeded printable DVD/CD first.
Printing on DVD/CDs
Choose either of the method below according to your purpose.
To print from DVD/CD label
You can print the label side of the DVD/CD on a printable DVD/CD by loading it on the
Platen Glass.
Printing from DVD/CD Label
To print a DVD/CD label from photo data on a memory card
You can print photo data on a memory card on a printable DVD/CD by loading the
memory card on the Card Slot.
Printing from Photo Data
To print a DVD/CD label from a printed photo
You can print a printed photo on a printable DVD/CD by loading it on the Platen Glass.
Printing from Printed Photo
To print a DVD/CD label from film
You can print an image on a film (35 mm negative/positive (strip/slide)) on a printable
DVD/CD by loading it on the Platen Glass.
Printing from Film (MP980 series)
To print a DVD/CD label by using the supplied application
CD-LabelPrint is bundled application software that allows you to edit and modify data
before printing. Install it on your computer to use it.
Printing with CD-LabelPrint from the Computer
Adjusting the Print Area
If the image was not printed on the intended area, follow the steps below to adjust the print
area.
1.
Make sure that the machine is turned on.
2.
Select
3.
Select
4.
Select Print settings, then press the OK button.
5.
Select DVD/CD print area adjust, then press the OK button.
6.
Use the or
> Printing on the Label Side of DVD/CDs
Settings on the HOME screen, then press the OK button.
Device settings, then press the OK button.
button to select Right/left or Top/bottom and use the
> Printing on the Label Side of DVD/CDs
or
Page 671 of 947 pages