Part Of The Page Is Not Printed - Canon MP980 series On-Screen Manual

Part of the Page Is Not Printed

>
Advanced Guide Troubleshooting
Part of the Page Is Not Printed
Check: When performing automatic duplex printing, the reason below is
possible.
When performing automatic duplex printing, the printable area at the top of the page will be 0.08
inches / 2 mm narrower than the usual.
For this reason, the bottom of the page may not be printed. To prevent this, select Use reduced
printing from the printer driver.
Important
Reduced printing may affect the layout depending on your document.
1.
Open the printer properties dialog box.
Opening the Printer Properties Dialog Box (Windows)
Click Here:
* Before clicking here to open the printer properties dialog box, quit the running application
software.
2.
Click Print Area Setup in the Page Setup sheet and select Use reduced printing.
1.
Open the Print dialog box.
Opening the Page Setup and Print Dialog Box (Macintosh)
2.
Select Duplex Printing & Margin in the pop-up menu.
3.
Select Automatic Duplex Printing.
4.
Click Use reduced printing in Print Area.
>
Print Results Not Satisfactory
Printer Driver
> Part of the Page Is Not Printed
Page 795 of 947 pages
Page top