Grounding Instructions - Stairmaster Crossrobics 1650 LE Owner's Manual

GROUNDING INSTRUCTIONS

The machine must be grounded if you are using the external power supply or
the battery charger. Grounding provides the path of least resistance for the
electric current, thereby reducing the risk of electric shock. The power supply
or battery charger must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
!
DANGER
IMPROPER CONNECTION OF THE EQUIPMENT-GROUNDING CONNECTOR CAN
RESULT IN THE RISK OF ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRI-
CIAN OR SERVICE PERSON IF YOU ARE IN DOUBT AS TO WHETHER THE MA-
CHINE IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH
THIS MACHINE. IF IT WILL NOT FIT THE AVAILABLE OUTLET, HAVE A PROPER
OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
The grounding plug on the power supply and the battery charger is
shown in sketch A below*. A temporary adapter, shown in sketches B and C,
may be used to connect the plug to a two-pole receptacle if a properly
grounded outlet is not available. The adapter should be used only until a prop-
erly grounded outlet (sketch A) can be installed by a qualified electrician. The
tab extending from the adapter must be connected to a permanent ground
such as the metal screw on the outlet cover.
* This may vary for International power supplies.
Grounding System
Page 70