Exercise Program Keypad; The Quick Start Program; The Manual Program - Stairmaster Crossrobics 1650 LE Owner's Manual

CROSSROBICS 1650 LE CONSOLE

EXERCISE PROGRAM KEYPAD

The exercise keypad is located below the display window. While the console is
in the "SELECT WORKOUT" mode, press one of the six exercise program keys
to preview the desired workout. The standard defaults are (pressing [ENTER]
without inputting data first will prompt the console to enter these values):
• Weight - 175 lbs.
• Intensity Level - 3
• Workout Time - The default time in the programmed workouts
and Quick Start is 20 minutes. The Manual and Constant Heart
Rate programs do not have a specified default time. In these
programs, the console timer will count up to the maximum time of
99 minutes, return to 0, and count back up if no time limit is set.
• Age (Constant Heart Rate program only) - 40 years
Once you have selected a program, the prompts are:
• "ENTER WEIGHT - LBS" - type in your body weight in
pounds (or kilograms if your console is set to metric units).
• "ENTER PLATE 3 - 12" - select the desired number of plates.
• "ENTER LEVEL 1 - 20" - select your intensity level with
level 1 being the easiest and level 20 the hardest.
• "ENTER TIME 5 - 99" - select the workout duration in one
minute increments from 5 to 99. Press 0 in the MANUAL and
CONSTANT HEART RATE program to workout for an unspecified
amount of time.

The Quick Start Program

Provides an immediate start, without having to enter any user information. This
program uses the standard default settings for derivation of calories burned.

The Manual Program

After pressing the [MANUAL] key, enter user and workout information. Begin
exercising at the selected level. If desired, adjust the workout manually by
using the intensity level arrow keys. The profile in the display window is
divided into 15 equal intervals within the workout time. The profile is based
Page 20