Stairmaster Crossrobics 1650 LE Owner's Manual page 61

PARTS REMOVAL AND REPLACEMENT
Left Side Cover
1. Remove the seat and the seat tray.
2. Remove the five fasteners along the back seam.
3. Remove the three fasteners on the left front (the two between the
pedal arms and the seat and the one on the lower left side).
4. Remove the fastener located on the right front cover. Pull the left side
cover off.
5. To reinstall the left side cover, line up the holes in the cover with the
holes in the frame and insert the fasteners.
6. Reinstall the seat and the seat tray.
Right Side Covers
There are two right side covers—one in the rear and one in the front. As a
general rule, the right rear cover is removed only if more extensive mainte-
nance is required. Under very special circumstances only will the right front
cover have to be removed.
1. Remove the seat and the seat tray.
2. Remove the left side cover.
3. Remove the five fasteners on the middle seam located on the right
side of the machine. The right rear cover can then be removed by
pivoting its top portion toward the rear of the machine.
4. Remove the fastener located on the right front cover. Remove the
right front cover. Note: The bottom front cover which is located on the
vertical post between the pedal arms should be left in place.
5. Reinstall the right side covers in the reverse order that you removed
Page 52