Table of Contents
Advertisement
Exam ple 1,"HM ,N012 345678 901 2345" |
Sets the QR Code's error c orrection level to H, which provides very high reliability; leaves the
mask number blank; s ets the data input mode to Manual; the type of charac ters are Num eric and
the data is 0123456789012345.
Structured Append Mode
QR Code offers a m ode c alled structured append (or concatenated) that collec ts data from
m ultiple QR Code symbols and us es that data els ewhere. For exam ple, the com ponents of a sub-
ass embly c an have individual QR Codes and the QR Code for the entire assem bly c ontains all
the data from the individual c odes. This mode also requires certain parameters at the beginning
of all batch data.
Syntax
"mode _id code # #o f_div parity, e rro r_ co r mas k # data_input char"
mode_id
code#
#of_div
parity
error_cor
m ask#
data_input
char
Exam ple 1,"D0205E9,Q0 A," |
C,"B 006qrco de," | }
Defines the struc tured append mode (D) for QR Code. This is symbol (02) of a concatenated set
containing (05) sym bols. The parity byte is E9. The error correction level is Q, which provides a
high reliability. Use 0 for the mask number. The data input mode is Automatic. The type of
characters are binary (B) and there will be six (06) data characters (qrcode).
6-10 Packet Reference Manual
Mode identifier. Use D to indicate the structured append (or
c oncatenated) mode.
Code number of the individual s ym bol in the concatenated set.
Use a two-digit number in decim al.
Total number of sym bols in this c onc atenated s et. Use a two-digit
number in decimal.
Parity byte. Use a two-digit number in hexadec imal. There is no
s tandard parity byte.
Level of error correc tion. Some damaged bar c odes m ay still be
sc annable if the error correction is high enough. Options:
H
Ultra high reliability level
Q
High reliability level
M
Standard level
L
High dens ity level
W hen inc reas ing the error correction level, the maxim um num ber
of c harac ters (in the field) dec reases .
Mas k number. Undefined. Leave blank or use 0.
Type of data input. W hen using Automatic, do not specify the
next parameter for char (type of charac ters ). Options :
A
Automatic
M
Manual
Type of characters. This parameter is only required when
data_input is M anual. Options:
A
Alphanumeric
B
Binary
K
Kanji
N
Num eric
In binary mode, the number of charac ters must be represented by
the 4-digit number in dec imal.
Classification: Avery Dennison – Public
Advertisement
Table of Contents
