The Printer Does Not Print; Printer Is Making Unusual Noises - Xerox WorkCentre 3045 User Manual

Probable Causes
The printer is connected to a power strip
shared with other high-power devices.

The Printer Does Not Print

Probable Causes
The printer is in Energy Saver mode.
PrintingScout displays an error message.
The printer is out of paper.
A toner cartridge is empty.
The Error Indicator is blinking.
No control panel indicators are lit.
The printer is busy.
The printer cable is disconnected.

Printer is Making Unusual Noises

Probable Causes
There is an obstruction or debris inside the
printer.
Solutions
Plug the printer directly into the outlet or into a power strip that is
not shared with other high-power devices.
Solutions
Push the control panel button.
Follow the instructions in the PrintingScout message to correct the
problem. If the error persists, contact your Xerox representative.
Load paper into the tray.
Replace the empty toner cartridge.
Turn off the printer, then turn it on again. If the error persists,
contact your Xerox representative.
Turn off the printer, confirm that the power cord is plugged in
correctly to the printer and the outlet, then turn on the printer. If
the error persists, contact your Xerox representative.
• If the Status Indicator is flashing green, it is normal. A previous
print job could be the problem. Use PrintingScout to delete all
print jobs in the print queue.
Load the paper in the tray.
• If the Status Indicator is not flashing after you send a print job,
check the USB connection between the printer and the
computer. If the USB cable is properly connected, turn off the
printer, then turn it on again.
• If the Status Indicator is not flashing after you send a print job,
check the USB connection between the printer and the
computer.
• For the WorkCentre 3045NI Multifunction Printer: If the Status
Indicator is green, but not flashing, after you send a print job,
check the Ethernet connection between the printer and the
computer.
Solutions
Turn off the printer and remove the obstruction or debris. If you
cannot remove it, contact your Xerox representative.
WorkCentre 3045 Multifunction Printer
Troubleshooting
161
User Guide