Xerox WorkCentre 3045 User Manual page 176

Troubleshooting
Symptom
The output is blank.
Streaks appear in the output.
The output has a mottled
appearance.
Ghosting appears in the printed
output.
176 WorkCentre 3045 Multifunction Printer
User Guide
Solutions
• Turn off the printer, then turn it on again.
• If the error persists, contact your Xerox representative.
Contact your Xerox representative.
• Verify that the paper is the correct size, type, and weight. If not, change
the paper settings.
• Adjust the bias transfer roller. For details, see
Roller on page 148.
• Verify that the paper is the correct size, type, and weight. If not, change
the paper settings.
• Change the Paper Type settings in the print driver.
In the Printing Preferences of the print driver, on the Paper/Output tab,
change the Paper Type setting.
• Adjust the bias transfer roller. For details, see
Roller on page 148.
• Adjust the fuser. For details, see
Adjusting the Bias Transfer
Adjusting the Bias Transfer
Adjusting the Fusing Unit on page 148.