Xerox WorkCentre 3045 User Manual page 48

Installation and Setup
from the router and connects to the network. The PBC is a moderately secure way to connect the
printer to the network. You do not need to enter any information to make the network connection.
• PIN (Personal Identification Number) automatically connects the printer to wireless router by using
a common PIN. The printer generates and prints a PIN for use in the setup process. When you enter
the PIN into the router, the router broadcasts network information using the PIN. When both
devices recognize the PIN, the router provides the security and configuration information to the
printer, which uses it to connect to the network.
To connect to a WPS wireless network using the PBC method:
Note: The wireless router must be connected and properly configured for the network before you
install the printer.
1. Push the PBC button on the wireless router.
The router begins broadcasting setup information for 120 seconds.
Note: If the wireless router does not have a physical PBC button, use your computer to push the
virtual button in the router control panel. For details, see your router documentation.
On the printer control panel, press the System button.
2.
3. To select Network, press the arrow buttons, then press OK.
4. To select Wireless Setup, press the arrow buttons, then press OK.
To select WPS, press the arrow buttons, then press OK.
5.
6. To select Push Button Control, press the arrow buttons, then press OK.
To select Yes, press the arrow buttons, then press OK.
7.
The printer communicates with the router to resolve setup and configuration information. The counter
starts counting down from 100. When the printer has the correct information, it connects to the router
and restarts with the proper setup and configuration information.
To connect to a WPS wireless network using the PIN method:
Note: The wireless router must be connected and properly configured for the network before you
install the printer.
On the printer control panel, press the System button.
1.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. To select Network, press the arrow buttons, then press OK.
To select Wireless Setup, press the arrow buttons, then press OK.
4.
5. To select WPS, press the arrow buttons, then press OK.
To select PIN Code, press the arrow buttons, then press OK.
6.
7. To select Print PIN, press the arrow buttons, then Press OK.
The PIN is printed at the top of the PIN Code Print.
48 WorkCentre 3045 Multifunction Printer
User Guide