Secure Settings; Scan To Email - Xerox WorkCentre 3045 User Manual

Features
Item
F/W Version
Adjust BTR
Adjust Fusing Unit
Density Adjustment
Clean Developer
Toner Refresh
Initialize NVM
Adjust Altitude
Counter Reset

Secure Settings

Use this menu for controlling access to printer features.
Item
Panel Lock
Service Lock
Secure Receive

Scan to Email

Use this menu to enable and disable the ability to edit the From field when an image is scanned to an
email address.
Item
Edit From Field
32 WorkCentre 3045 Multifunction Printer
User Guide
Description
Displays the latest firmware version.
Specifies the bias transfer roller (BTR) voltage for printing on the selected paper type.
Specifies the optimum Fusing Unit voltage for printing on the selected paper type.
Compensates for the changes in toner intensity that can occur as toner cartridges or the
imaging unit age.
Rotates the developer motors and stirs the toner cartridges to clear old toner from the
developers.
Rotates the developer and stirs the toner in the developer.
Initializes the settings stored in the non-volatile memory (NVM) except for the network
settings. The NVM stores the printer settings even after the power is turned off. After
executing this function and restarting the printer, all the menu settings are reset to their
default values.
Note: You cannot select this setting during printing.
Adjusts the altitude of the printer to obtain optimal printing results.
Resets the toner counter for accurate reporting of the toner status.
Description
When enabled, access to the Admin Menu requires a password. For details, see
the Panel Lock Password
Specifies if a function is unlocked and available to everyone, locked from everyone, or
password locked, requiring a password for access:
• Copy
• Fax
Available on WorkCentre 3045NI Multifunction Printer only.
• Scan
• Print from USB
Note: Panel Lock must be enabled before setting the service locks.
Turns Secure Receive Set On or Off.
Description
Enables or disables the edit From field function.
on page 141.
Changing