Xerox WorkCentre 3045 User Manual page 22

Features
1. One Touch keypad: Use to speed dial a phone
number. Available on WorkCentre 3045NI
Multifunction Printer only.
2. Copy, Scan, Print, and Fax buttons: Press to use the
Copy, Scan, Print, and Fax menus on the display
screen. Fax available on WorkCentre 3045NI
Multifunction Printer only.
3. Arrow Buttons: Press to move up, down, forward,
and back through the menus.
4. Job Status button: Displays lists of the active or
completed jobs on the touch screen.
5. System button: Switches the display to the System
menus.
6. Alphanumeric keypad: Use to enter letters and
numbers for names and phone numbers.
7. Redial/Pause button: Press to recall the last fax
number used or to insert pauses in fax numbers.
Available on WorkCentre 3045NI Multifunction
Printer only.
8. Speed Dial button: Press to access directories of
group or individual fax telephone numbers. Available
on WorkCentre 3045NI Multifunction Printer only.
9. Wake Up/Power Saver button: This button is
illuminated in Energy Saver mode. Push the button
to exit Energy Saver mode.
10. Clear All button: Clears all current settings for print,
copy, scan, or fax back to default settings.
Control Panel Symbols
Symbol Name
Copy
Scan
Print
22 WorkCentre 3045 Multifunction Printer
User Guide
11. Stop button: Cancels the current job.
12. Start button: Press to start a copy, scan, or fax job.
13. Status indicator: The green or red light indicates
printer status:
Lights green when the printer is ready to receive
data.
Blinks green when the printer is busy receiving data.
Lights red to indicate an error condition or warning
that requires your attention.
Blinks red when an error occurs that requires
technical support.
Off when the printer is in Energy Saver mode.
14. Cancel/Clear button: In menus, deletes a single
character each time the button is pressed.
15. Address Book button: Press to access the fax and
email address books. Available on WorkCentre
3045NI Multifunction Printer only.
16. OK button: Press to accept the selected setting.
17. Back/Return button: Press to navigate up one level
in the menu.
18. Display Screen: Shows status messages, menus,
and toner levels.
Description
Allows you to change job settings for copy jobs.
Allows you to change job settings for scan jobs.
Prints from USB memory.