Adjusting The Density; Adjusting The Altitude - Xerox WorkCentre 3045 User Manual

Adjusting the Density

The Density Adjustment controls how much toner is used to print and copy. Adjust the density for lighter
toner use for saving toner or heavier for making prints bolder. A positive adjustment makes the prints
darker, while a negative adjustment makes the prints lighter. It can also be used to compensate for
different paper types and thicknesses.
To adjust the density:
On the printer control panel, press the System button.
1.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. Select Maintenance, then press OK.
Select Density Adjustment, then press OK.
4.
5. To increase or decrease the amount of offset, use the arrow buttons, then press OK.
To return to the Ready screen, press Return.
6.

Adjusting the Altitude

Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed. If
the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1. On the printer control panel, press the System button.
To select Admin Menu, press the arrow buttons, then press OK.
2.
3. Select Maintenance, then press OK.
4. Select Adjust Altitude, then press OK.
Press the arrow buttons to select the altitude of the location of the printer, then press OK.
5.
6. To return to the Ready screen, press Return.
WorkCentre 3045 Multifunction Printer
Maintenance
149
User Guide