Xerox WorkCentre 3045 User Manual page 30

Features
Item
Ring Tone Volume
Line Type
Dialing Type
Interval Timer
Number of Redial
Redial Delay
Junk Fax Filter
Remote Receive
Remote Rcv Tone
Send Header
Company Name
Your Fax Number
Fax Cover Page
DRPD Pattern
Prefix Dial
Prefix Dial Num
Discard Size
ECM
Extel Hook Threshold
Modem Speed
Fax Activity
Fax Transmit
Fax Broadcast
Country
30 WorkCentre 3045 Multifunction Printer
User Guide
Description
Specifies the ring volume for incoming faxes.
Specifies the default line type: PSTN or PBX.
Specifies the dialing type.
Specifies the interval timer from 3–255 seconds.
Specifies the number of attempts made to redial a fax number from 0–9.
Specifies the interval between redial attempts from 1–15 minutes.
When set to On, accepts incoming faxes only from numbers registered in the Address
Book.
When set to On, you can elect to receive a fax by pressing the remote receive code on the
external telephone. Press the remote receive code after you pick up the telephone
handset.
Specifies the tone in two digits from 00–99, when Remote Receive is set to On.
When set to On, each outgoing fax includes a header, including the company name, fax
number, and the date and time the fax was sent. When set to Off, no header information
is included in the outgoing faxes.
Note: Many countries have fax regulations that require Send Headers in each outgoing
fax. The regulations specify the information that must be included in the header.
Specifies the sender name that is recorded in the sender report.
Specifies your telephone number, which is printed at the top of each page sent from your
printer.
When set to On, automatically prints a fax cover page. When set to Off, does not print a
fax cover page.
Specifies a distinctive ring pattern for use with DRPD service. Your telephone company
specifies the DRPD Patterns.
Specifies if you want to add the prefix number when you send a fax.
Specifies the prefix dial number, up to five digits. This number dials before any auto dial
number is started.
Specifies if the printer discards any excess data at the bottom of the page.
If Error Correction Mode (ECM) is set to On, it attempts to correct errors in the fax
transmission from problems, such as a noisy telephone line. The default setting is On.
Specifies the threshold value for the external telephone.
Specifies the fax modem speed.
Turns Auto Print On or Off.
Specifies the fax transmit mode.
Specifies the fax broadcast mode.
Specifies the country in which the fax is installed.