Pc-Fax Rx Settings; Tsi User Box Setting - Oce VarioLink 2222c User Manual

10

PC-Fax RX Settings

Specify whether to use the PC-Fax RX function. To use the function, configure the following items.
If two units of the Fax Kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in Admin-
istrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line. For details
on [Individual Receiving Line Setup], refer to page 10-20.
Reference
- The documents received by fax are saved in the TIFF format in a User Box.
d
Reference
For details on PC-Fax RX, refer to page 7-4.
Item
[Receiving User Box
Destination]
[Print]
[Password Check]

TSI User Box Setting

Specify whether to use the TSI User Box function. To use the function, configure the following items.
If two units of the Fax Kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in Admin-
istrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line. For details
on [Individual Receiving Line Setup], refer to page 10-20.
d
Reference
For details on the TSI User Box function, refer to page 7-5.
10-26
Description
You can specify destinations in a Memory RX User Box or a Specified User
Box. If [Specified User Box] is selected, destinations are saved in a User Box
specified with an F code subaddress.
Specify whether to print a fax after receiving.
Specify a communication password (up to 7 digits).
Administrator Settings (G3)
VL3622c/VL2822c/VL2222c
10.4