Ftp Setting - Ftp Tx Setting - Oce cm5520 User Manual

Administrator mode
!
Detail
For details on the status notification function, refer to "Status Notification
Setting" on page 3-6.

FTP Setting - FTP TX Setting

Specify the transmission settings, such as the FTP proxy server.
Item
FTP TX
Proxy Server Address
Proxy Server Port
Number
Connection Timeout
Port Number
cm5520
Description
Select whether or not the FTP TX function is used.
Type in the address of the proxy server. (Format: ***.***.***.*** or
FQDN: Range for ***: 0 to 255) To type in a host name, select the
check box. If the machine is set to use IPv6, an IPv6 address can
also be specified.
Type in the port number for the proxy server. (Range: 1 to 65535)
Type in the amount of time until communication with the FTP server
times out. (Range: 5 to 300 seconds)
Type in the port number. (Range: 1 to 65535)
3
3-89