Display The Event Log Configuration; Restore The Event Log Configuration; Clearing The Event Log - Qlogic SANbox 9000 Series Interface Manual

A
The following example configures the event log to record switch management
events with warning and critical severity levels associated with ports 0–3. Entering
the Set Log Save command ensures that this configuration is preserved across
switch resets.
SANbox (admin) #> set log component switch
SANbox (admin) #> set log level warn
SANbox (admin) #> set log port 0 1 2 3
SANbox (admin) #> set log save
12.3.2

Display the Event Log Configuration

Enter the
settings as shown in the following example:
SANbox #> show log settings
Current settings for log
------------------------
Started
FilterComponent
FilterLevel
DisplayLevel
FilterPort
FilterBlade
12.3.3

Restore the Event Log Configuration

Enter the
factory default as shown in the following example:
SANbox (admin) #> set log restore
12.4

Clearing the Event Log

Enter the
the following example:
SANbox (admin) #> set log clear
59231-03 A
Show Log Settings command to display all event log configuration
True
NameServer MgmtServer Zoning Switch Blade Port Eport Snmp CLI QFS
Info
Critical
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62
63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82
83 84 85 86 87 88 89 90 91 92 93 94 95 96 979 89 99 100 101
102 103 104 105 106 107 108 109 110 111 112 113 114 115 116
117 118 119 120 121 122 123 124 125 126 127
IO0 IO1 IO3 IO7 CPU0
Set Log Restore command to return the event log configuration to the
Set Log Clear command to delete all entries in the event log as shown in
12 – Event Log Configuration
Clearing the Event Log
12-5