ETC Lighting Control Console User Manual page 55

Hide Mouse
With hide mouse enabled, if the mouse is left idle for 10 seconds, the cursor will go away. Once the
mouse is used again, the cursor will return. By default, this is "Disabled".
{ D i s p l a y s }
This desk setting button gives you access to the Element display settings.
High Contrast Display
This button toggles the setting between "Enabled" and "Disabled". When enabled, high-contrast
brightens the magenta used to show tracked values.
The default setting for this is "Disabled".
Show Reference Label
This button toggles the setting between "Enabled" and "Disabled". When enabled, referenced
record targets (such as palettes) with labels will have their labels displayed in the live/blind display
rather than their target type and number. [Shift] & [Label] can be used to temporally toggle
between views.
The default setting for this is "Disabled".
Group Chans By 5
You can turn off/on the grouping of channels in groups of 5 in the live summary view from this field.
The default for this setting is "Enabled.
100 Channel Display
This setting can be used to display 100 channels at a time in the live summary view. The default for
this setting is "Disabled."
Cmd Line on PSD
This setting can be used to display an optional command line on the Playback Status Display. The
default for this setting is "Disabled".
PSD Time Countdown
In the Playback Status Display (PSD), holding down [Time], while a cue is fading, will display the
cue category times counting down in the cue list display area. The default action is to show the total
time not the countdown. When the {PSD Time Countdown} is enabled, the cue category times will
countdown as a cue is fading. To see the total time, hold down the [Time] key. {PSD Time
Countdown} is "disabled" by default.
{ P D F F i l e S e t t i n g s }
This screen allows you to select the orientation and paper type for PDF files.
{ B r i g h t n e s s S e t t i n g s }
This screen allows you to adjust the brightness of attached desk lamps. The {Desk Lamp} fader
has a range of 0% (dimmest level) to 100% (brightest level).
{ R F R S e t t i n g s }
This screen is for allowing Net3 RFR, iRFR, and aRFR connections. The default setting is
"Enabled". For more information see RFR, page 244 and Remote Focus Remote (RFR), page 258.
5
Setup 43