ETC Lighting Control Console User Manual page 260

T e x t I n d i c a t o r s i n l i v e / b l i n d
Please note examples of text indicators in the following graphic:
"Ph" "+"
"Q"
Color conventions listed above apply to text indicators as well. Therefore red indicates a manual
value that must be stored.
• _ . . . . . . . . . . . . . . . . . . .Underlined value (white) indicates a system-applied block
• + . . . . . . . . . . . . . . . . . . .Found in place of parameter data in summary view. Indicates
• B. . . . . . . . . . . . . . . . . . .Indicates the channel or parameter is manually blocked. This
• I . . . . . . . . . . . . . . . . . . .Channel is controlled by an inhibitive submaster.
• IP, CP, FP, BP . . . . . . . .Indicates that the value is referenced to a palette (Intensity,
• P . . . . . . . . . . . . . . . . . . .Indicates the channel is parked.
• Ph. . . . . . . . . . . . . . . . . .Indicates the channel is at a preheat level.
• Q. . . . . . . . . . . . . . . . . . .Found in the non-intensity categories of a marked channel.
248
"_" (underscore)
"R"
"B"
(also called an auto-block).
that parameters in that category are at different values. This
indicator is found only in the summary view.
block must be stored.
Color, Focus, or Beam). This text is followed by a number,
indicating which palette is being referenced. This can be
substituted with the palette label if the "Show Reference
Label" setting is activated.
The "Q" is followed by a number indicating which cue the
mark is in preparation for.
"CP2" "P"
"I"
"ND"
Element User Manual