ETC Lighting Control Console User Manual page 143

O t h e r G o T o C u e o p t i o n s
When [Go to Cue] is pressed, the softkeys in the CIA are changed to provide Go to Cue modifiers
to enhance your playback ability.
From these softkeys, you can specify that when going to a cue, only some elements of that cue will
be played back. Specifically you can choose to play back:
• single parameter channels only (conventionals),
•
• multiple parameter channels only (moving lights),
•
• move instructions only,
•
• or you can choose play back a cue and withhold any link (follow, execute instructions) it may
contain.
•
These can be combined within the command line as well:
•
[Go To Cue] [4] {Complete} [Enter] will go to cue 4 and if that cue has a follow/hang, any following
cues in the sequence will also fire. This may look like you are going straight to the last cue in the
sequence, but each cue will fire to make sure that any external links are fired.
[Go To Cue] [2] [At] [5][0] {Complete} [Enter] will go to cue 2 at 50% of its completion.
11
Cue Playback
[GoTo Cue] [1] {SingleParam} [Enter]
[GoTo Cue] [2] {MultiParam} [Enter]
[GoTo Cue] [3] {MovesOnly} [Enter]
[GoTo Cue] [4] {MinusLinks} [Enter]
[Go To Cue] [1] {MultiParam} {MovesOnly} [Enter]
131