Element will display the following information that it receives from the dimmers:
•
Address
•
Channel
•
Label
•
System
•
Rack
•
Lug
•
Properties
•
•
•
•
•
Loads
Recorded Loads
N o t e :
N o t e :
With a dimmer or dimmers selected, you can edit various dimmer settings in the property view,
which will display in the CIA. Items with a caret (>) are editable. When multiple dimmers are
selected together for editing, an "*" will show for data that is different between the selected
dimmers.
FDX dimmers will not display data for the following:
•
Recorded Load
•
Actual Load
•
Rack Dimmer Source
•
Threshold
•
Scale Minimum
•
Preheat Enable
•
Preheat Timing
•
AF Enable
N o t e :
6
Patch
Module Type
Firing Mode
Control Mode
Curve
The System ID number from CEM3 is not currently supported.
Rack numbers and dimmer numbers need to be unique for Element to properly
recognize them. For CEM+, dimmers also need to be patched to different sACN
addresses.
When dimmers are discovered, they are not automatically attached to patched
channels in Element; you must attach a dimmer to a channel.
Discovered Dimmers and RDM Devices" on page 70.
See "Patching
67