Macro Editor Display - ETC Lighting Control Console User Manual

Macro Editor Display

Macro editing is accomplished from the macro editor display. As an alternative to recording your
macro in live, you may create it from this display instead. Open the macro editor display from the
browser by navigating to Record Target Lists > Macro Editor, then press [Select]. The editor will
display on an external monitor.
The display is divided horizontally, the top portion displays the macro contents in detail while the
bottom portion lists all macros, including the label and contents.
While in the macro editor display, any numeric entry on the command line is assumed to be a macro
number. If the macro number entered already exists and [Enter] is pressed, the macro list will page
to the selected macro and the macro content detail section will display all of the contents of the
selected macro. If the macro number entered does not exist in the list and [Enter] is pressed, an
empty macro will be created with the specified macro number.
200 Element User Manual