ETC Lighting Control Console User Manual page 166

Entry
Establishes at what time and how channels will enter the effect. To change the entry method click
{Entry} and then choose a method from the buttons to the left. Entry modes vary by effect type. The
options are:
• {Cascade} - channels enter the effect according to the trail and cycle time values (if
applicable).
• {Immediate} - all channels enter the effect instantaneously.
• {Fade by Size} - the effect will achieve its full value as allowed by the pattern or step or
absolute values using the In Time.
• {Fade by Size and Rate} - the effect will achieve its full value as allowed by the pattern or step
or absolute values and ramp up to full speed using the In Time.
• {Fade by Rate} - increases the rate of the effect as it enters. If an effects submaster has an
entry mode of {Fade by Rate}, the submaster will control the rate between 0 to 100.
Exit
Establishes at what time and how channels will exit the effect. To change the exit method click
{Exit} and then choose a method from the buttons to the left. Exit modes vary by effect type and
how the effect is stopped. The options are:
• {Fade by Size} - when the effect is exited, values will return to their background state while
still running using the exit time.
• {Fade by Size and Rate} - when the effected is exited, channels will stop running the effect
and return to their background state using the exit time.
• {Fade by Rate} - decreases the rate of the effect as it exits.
• {Stop and Fade} - when the effected is exited, channels will stop running the effect and return
to their background state using the exit time.
• {Stop and Hold} - when the effect is existed, channels will halt exactly where the effect left
them.
Time (Entry or Exit)
These fields establish the length of time for channels to enter or exit the effect. It can be entered in
minutes and seconds from the keypad. These timing values are applied to the entry and exit
modes. You can also use cue level timing or submaster bump button timing for these. click {Entry
Time} [Enter] or {Exit Time} [Enter]. Cue/ Sub is the default entry/ exit timing for effects.
154 Element User Manual