CAKEWALK PRO AUDIO User Manual page 94

3-16
There are a few special shortcuts for setting certain parameters:
Parameter...
Source
Key+
You can also edit Track properties in the Track Properties dialog box. To
open this dialog box:
¥ Move the highlight to the trackÕs Source, Port, Chn, Bank, or Patch
column, then press Enter
¥ Double-click in the trackÕs Source, Port, Chn, Bank, or Patch column
¥ Right click on any column (except Bank and Patch) in the track and
choose Track Properties
You can change the value of a track parameter for several tracks at once
using commands on the Track-Property menu. For example, to assign a
group of tracks to the same output port, select the tracks you want to
assign, then choose Track-Property-Port. These menu commands can
also be used to change the settings for individual tracks.
Shortcut...
Hold the Shift key, and click in the cell to
cycle through the available audio sources
Right-click the Spin buttons, or press the
[ (open bracket) and ] (close bracket) keys
to change the value by 12 (a full octave)
instead of 10