Table of Contents
Advertisement
15-4
To Use the Internal Clock Source...
1.
Click
on the Sync toolbar.
OR
1.
Choose Options-Project , and click the Clock tab.
2.
Check the Internal box.
3.
Click OK.
To Use the Audio Clock Source...
1.
Click
on the Sync toolbar.
OR
Choose Options-Project , and click the Clock tab.
1.
2.
Check the Audio box.
3.
Click OK.
MIDI Synchronization
MIDI Synchronization, or MIDI Sync, is usually used to synchronize
Pro Audio with drum machines, stand-alone MIDI hardware sequencers,
and sequencers built into MIDI keyboards.
When MIDI devices are synched, the master device sends messages to
all other devices to start and stop playback and to keep all the devices in
sync. To change the tempo of a song, you adjust the tempo on the master
device. The playback tempo on all slave devices is then set automatically.
The following MIDI messages are sent by the master device to support
MIDI Sync:
Message...
Start
Stop
How it is used...
This message tells slave devices to start
playing from the beginning of the
currently loaded sequence.
This message tells slave devices to stop
playback.
Advertisement
Table of Contents
Troubleshooting
