Grouping Controls - CAKEWALK PRO AUDIO User Manual

11-6

Grouping Controls

Pro Audio lets you create groups of StudioWare controls. When several
controls are in a single group, you can move a single control and have the
remaining controls in the group adjust automatically. This is useful for
many different mixing and crossfade applications.
When you create a group of controls, each control in the group has a
starting and an ending value. HereÕs how these values are used:
¥ When you move any control in the group to its starting value, all
controls in the group are set to their starting value
¥ When you move any control in the group to its ending value, all
controls in the group are set to their ending value
¥ When you position any control in the group somewhere between its
starting and ending value, all controls in the group are set to the
same relative position between their starting and ending value
The initial range for each control is set based on the position of the
controls at the time you group them.
You can adjust the range for any individual control, even if it is part of a
group, simply by holding the Shift key while you move the control. When
you adjust an individual control by holding the Shift key, its maximum
or minimum is adjusted, depending on whether the entire group is closer
to its minimum or maximum value.