Event List Display Filter; Editing Events And Event Parameters - CAKEWALK PRO AUDIO User Manual

¥ See Chapter 14, Using System Exclusive Data, for more information
about System Exclusive banks.
¥ See Chapter 7, Editing Audio, for more information about audio
events.
Additional information about note events and MCIcmd events appears
later in this chapter.

Event List Display Filter

You can conÞgure the Event List view to display different event types, as
described in the following table:
To do this...
Display events of a certain type
Open the Event Manager

Editing Events and Event Parameters

The Event List view lets you add, delete, or change events one by one.
You can also print the list of events or audition the events one at a time
to see how they sound.
You can change the parameters of any event by moving the rectangular
highlight to the cell you want to change and doing one of the following:
¥ Type a new value and then press Enter
¥ Press the - and + keys on the numeric keypad to decrease or
increase values by a small amount
¥ Press the [ and ] keys to decrease or increase values by a larger
amount
¥ Click and hold the mouse button, and then drag the mouse up or
down to change the value by a small amount
¥ Click and hold both mouse buttons, and then drag the mouse up or
down to change the value by a larger amount
¥ Double-click a cell, and then enter or choose a new value
If you change the time of an event, it may also change its position in the
event list. The Event List view follows that event to its new location.
Do this...
Select the event type in the toolbar, in the
Event List view pop-up menu, or in the
Event Manager.
Choose Event Manager from the pop-up
menu, or click .
6-45