Table of Contents
Advertisement
7-42
To Apply Delay to Audio Data...
1.
Select the audio data to be affected. Select a stereo pair for
stereo delay.
2.
Choose Audio Effects-Cakewalk FX-Delay from the Edit
menu or from the pop-up menu to open the Cakewalk FX Delay
dialog box.
3.
Set the parameters in the dialog, as described in the table in the
"Adding Chorus" section above.
4.
Click OK.
Pro Audio applies the specified delay effect to the selected data.
Adding Flanging
The Cakewalk FX Flanger command mixes the original signal with a
slightly delayed version of the signal, so that the two are out of phase.
This creates a spacey, ethereal sound.
Parameters for the Flanger effect are identical to those for the Chorus
and Delay effects. However, with the Flanger, the maximum value for
the Delay parameter is 20 ms.
To Apply Flanging to Audio Data...
1.
Select the audio data to be affected. Select a stereo pair for
stereo flanging.
Choose Audio Effects-Cakewalk FX-Flanger from the Edit
2.
menu or from the pop-up menu to open the Cakewalk FX Flanger
dialog box.
3.
Set the parameters in the dialog, as described in the table in the
"Adding Chorus" section above.
4.
Click OK.
Pro Audio applies the specified flanging effect to the selected data.
Advertisement
Table of Contents
Troubleshooting
