CAKEWALK PRO AUDIO User Manual page 343

output port (note that not all MIDI devices support chorus and reverb
controller messages).
Tip:
You can control the level of all MIDI tracks at once by grouping the
MIDI faders. For more information, see ÒUsing Control GroupsÓ later
in this chapter.
You can control the mixing and playback of a MIDI track as follows:
To do this...
Add a real-time MIDI effect
to the track
Remove an effect
Select the output port
Select the channel
Select the bank
Select the patch
Set the Chorus level
Set the Reverb level
Mute the track
Solo the track
Arm the track for recording
Set the Pan level
Set the Volume level
Select the input source
Do this...
Right-click in the Effects patch point and select
an effect from the list (for more information, see
"Using Real-Time Effects" later in the chapter)
Select the effect and press Delete or right-click
and select Delete .
Click the Port button and choose one from the list
Click the Channel button and choose one from
the list
Click the Bank button and choose one from the
list
Click the Patch button and choose one from the
list
Adjust the Chorus slider
Adjust the Reverb slider
Click the Mute button
Click the Solo button
Click the Arm button
Adjust the Pan fader
Adjust the Volume fader
Click the input source button and choose one
from the list
9-9