F-6
FX Stereo Parametric EQ
Preset...
6dB High pass filter
6dB Low pass filter
AC Hum removal
Flat response
CFX 2-Band EQ
Preset...
60 Cycle Hum
1 Pole Lowpass
2 Pole Lowpass
1 Pole HiPass
2 Pole HiPass
Partials Boost (Middle C)
Mid-Range Cut
Description...
Slight reduction of low-frequency elements.
Slight reduction of high-frequency elements.
Narrow band pass filter, reducing frequencies
around 60Hz by 12dB.
No filtering.
Description...
A notch to remove 60 cycle hum.
A template 6dB per octave roll-off lowpass. The
cutoff frequency is set at 10,000 Hz but can be
moved as needed.
A template 12dB per octave roll-off lowpass. The
cutoff frequency is set at 10,000 Hz but can be
moved as needed.
A template 6dB per octave roll-off hipass. The
cutoff frequency is set at 1,000 Hz but can be
moved as needed.
A template 12dB per octave roll-off hipass. The
cutoff frequency is set at 1,000 Hz but can be
moved as needed.
An example preset to demonstrate how to boost
specific partial(s) in an audio file. This example
boosts the fundamental and 1st partial of a Middle
C note (fundamental at 261.63 Hz) Very useful for
sound-designers needing to tailor multi-samples
across a keyboard.
A wide band frequency range with a 6dB cut. Also
useful are narrow bands to reduce or cut an
unwanted frequency, such as a ring in a snare
drum.