Table of Contents
Advertisement
6-40
To Insert a Controller Value...
1.
In the Controllers pane, choose the data type, controller or xRPN
number, and channel (if applicable) from the lists in the toolbar.
2.
Select the
tool or the
3.
Click in the Controllers pane view at any desired time point and
value.
Pro Audio adds a controller at the indicated point.
To Draw a Linear Series of Controllers...
1.
Choose the data type, controller or xRPN number, and channel (if
applicable) from the lists in the toolbar.
2.
Select the
tool.
3.
Drag a line in the Controllers pane from the starting time and
value to the ending time and value.
Pro Audio adds a series of controllers and erases any existing
controller values in the same time interval.
To Draw a Series of Controller Value Changes...
1.
Choose the data type, controller or xRPN number, and channel (if
applicable) from the lists in the toolbar.
2.
Select the
tool.
3.
Drag the cursor across the Controllers pane, adjusting the value
as you move left to right.
Pro Audio adds a series of controllers and erases any existing
controller values in the same time interval.
Tip:
When using the
tool, you can press and hold the Shift key to draw
a straight line.
To Insert a Series of Controllers...
tool.
Advertisement
Table of Contents
Troubleshooting
