Using The Controllers Pane - CAKEWALK PRO AUDIO User Manual

Message... Parameter number
MSB Controller...
RPN 101
NRPN 99
6-36
following table shows the controller numbers Pro Audio uses for RPN
and NRPN events:
Parameter number
LSB Controller...
100
98
Automation Data
Both the Console view and the StudioWare view allow you to record
automation data that deÞne changes in volume and pan throughout a
project. The automation data can include step changes recorded using
the snapshot button or continuous changes recorded while using the
knobs, faders, and buttons.
Velocity, Pitch Wheel, and Aftertouch
Pro Audio lets you display and edit several other types of data the same
way you do controller data. These data include:
¥ MIDI note velocities
¥ MIDI pitch wheel or pitch-bend messages
¥ MIDI channel aftertouch (ChanAft) values
¥ MIDI key aftertouch (KeyAft) values
Remember that note velocity is an attribute of each note and not a
completely separate event. You cannot add or remove velocity events in
the Controllers pane, but you can use the line and draw tools to adjust
the velocity values for existing notes. You can also edit velocities with
the Edit-Scale Velocities command. For more information, see ÒAdding
Crescendos and DecrescendosÓ on page 6-15. You can edit individual note
velocities in the Note Properties dialog box, described in ÒChanging Note
PropertiesÓ on page 8-12.

Using the Controllers Pane

The Controllers pane is the most powerful and ßexible way to edit
controller, RPN, NRPN, automation, velocity, pitch wheel, and
Data value Data value
MSB Controller... LSB Controller...
6 38
6 38