CAKEWALK PRO AUDIO User Manual page 345

This is shown in the picture below:
Real-time effects (if any)
Aux Send level sliders
Pan control
Volume fader
Destination (main output)
Any audio track can be tapped, before or after the track volume control,
and sent to one or more aux busses. An aux bus can tap any number of
audio tracks. Each trackÕs data passes through the trackÕs send level
knob on its way to the aux bus. This is shown in the diagram below:
Both tracks routed
to Aux 1
This track is routed
to Aux 2
Aux Send on/off button
Source (audio input)
Pre-fader (volume is not adjusted by
the incoming track volume fader)
Post-fader (volume is adjusted by the
incoming track volume fader)
9-11