To make alignment of envelopes with audio data easier, the envelope is
superimposed on the audio event in the Audio view, as shown here:
To set up a volume or pan envelope, you must:
¥
Create an envelope
¥
Create intermediate points
¥
Drag points and line segments to shape the envelope as desired
These operations are described in the following table:
To do this...
Create a new envelope
Delete an envelope
Show or hide envelopes
Add a new envelope node
Do this...
Right-click the event and choose
Envelope-Create Volume or Envelope-
Create Pan
Right-click the event and choose
Envelope-Delete Volume or Envelope-
Delete Pan , or right-click the envelope
and choose Delete Envelope
Click Show Volume Envelopes
Show Pan Envelopes
Double-click on an envelope line
segment, or right-click the envelope and
choose Add Node
or
7-15