Table of Contents
Advertisement
To Change a Meter's Range...
1.
Right-click on the meter and choose a new range.
To Change the Number of Aux Busses...
1.
Choose Options-Audio and click the General tab.
2.
Enter the desired number of aux busses in the Number of Aux
Busses box.
3.
Click OK.
The next time you start Pro Audio, the Console view contains the
designated number of aux busses.
To Choose Balance or Pan Controls...
1.
Choose Options-Audio and click the General tab.
2.
Choose Balance Control or Constant Power in the MIDI Pan
Mapping box.
3.
Click OK.
Pro Audio interprets MIDI pan messages as you requested.
To Set the Volume Taper...
1.
Choose Options-Audio and click the General tab.
2.
Select Linear Scale or Quadratic Taper from the MIDI Volume
Mapping list.
3.
Click OK.
Pro Audio combines volume and velocity according to the settings
you have chosen.
To Set the Snap-to Position of a Knob or Fader...
1.
Set the control to the desired position.
Right-click on the control and choose Set Snap-To=Current .
2.
From now on, the control returns to this position when double-clicked.
To Insert a New Track...
1.
Right-click on an empty area in the Console view.
9-7
Advertisement
Table of Contents
Troubleshooting
