Table of Contents
Advertisement
1.
Choose Insert-Series of Controllers to display the Insert Series of
Controllers dialog box.
2.
Choose the controller type from the Insert list.
3.
Choose the controller number or type from the Number list.
4.
Use the spinners or enter the desired MIDI channel.
5.
Enter a starting and ending value in the Begin and End boxes.
6.
Enter a starting and ending time in the From and Thru boxes.
7.
Click OK when you are done.
Pro Audio inserts a series of controller events with values that change
smoothly over time from the starting to the ending value indicated in
the dialog box. This command never inserts more than one event on
the same clock tick. If any controllers of the type you have selected
already exist in the time region, Pro Audio deletes these before
inserting the new ones.
To Remove or Erase Controllers...
1.
Choose the data type, controller or xRPN number, and channel (if
applicable) from the lists in the toolbar.
2.
Select the
tool.
3.
Drag the mouse over the desired region to highlight the region you
want to erase.
6-41
Advertisement
Table of Contents
Troubleshooting
