Table of Contents
Advertisement
1-16
To Connect a MIDI Keyboard to Your Computer...
1.
One of the 5-pin connectors on the MIDI cable is labeled Out.
Plug this connector into the MIDI In jack on your electronic
keyboard.
2.
The other 5-pin connector on the MIDI cable is labeled In. Plug
this connector into the MIDI Out jack on your electronic keyboard.
3.
Plug the 15-pin connector on the MIDI cable into the MIDI/joystick
port on your sound card. (If you have a joystick, unplug it, plug in
the MIDI cable, and plug the joystick into the pass-through
connector on the MIDI cable.)
To Connect an Electric Guitar to Your Computer...
1.
Plug your 1/4" mono guitar cable into a 1/8" stereo adapter.
2.
Plug the 1/8" jack into the microphone input or line input jack on
your computer sound card.
To Connect a Microphone to Your Computer...
1.
If your microphone does not have a 1/8" mono or stereo plug,
plug the microphone into a 1/8" adapter.
2.
Plug the 1/8" jack into the microphone input jack on your
computer sound card.
That's it! Now that your instruments are all set to go, you can restart
your computer and turn on your keyboard, guitar, and microphone.
Installing Pro Audio...
Pro Audio is easy to install. All you need to do is choose the folder where
the program and sample project Þles should be stored. Before you start,
make sure you have your serial number and CD-KEY handy. Your serial
number is located on your registration card. Your CD-KEY is located on
the back of your CD case.
Advertisement
Table of Contents
Troubleshooting
