Loops - CAKEWALK PRO AUDIO User Manual

To Clear Stuck Notes...
1. Choose Realtime-Reset , or click
toolbar.

Loops

Sometimes you want to listen to one portion of a project over and over,
either so you can play along and rehearse or because you want to edit
that section of the project while it is playing and hear the results as you
make changes. Pro Audio has a playback loop feature that makes this
simple.
Loops are deÞned in the Loop/Auto Shuttle toolbar, as shown here:
Click to turn looping on or off
Loop From Loop Thru
time time
To set up a loop, you do three things:
¥ Set the start time of the loop
¥ Set the end time of the loop
¥ Enable looping
ThatÕs all there is to it. From then on, Pro Audio will automatically jump
back to the start of the loop when it reaches the end.
When looping is enabled, the loop times are indicated by special markers
in the time ruler.
Loop From
on the Large Transport
Click to copy the
selection (From
and Thru) times
Click to open the
Loop/Auto Shuttle
dialog box
Loop Thru
3-7