CAKEWALK PRO AUDIO User Manual page 543

The following section lists the different variables you can change in
cakewalk.ini.
Variable...
DrawPlayingAudio=< 0 or
1>
ForegroundForSMPTE=<0
or 1>
HyphenDir=<drive:path
name>
MaxPanelUndoSteps=
<num>
PanelsShowWidgetBitmaps
= <0 or 1>
PanicStrength=<0 or 1>
Type... Default value...
Boolean 0 (disable)
Boolean 1 (enable)
Path <installation
directory>\ttshyph.dll
Integer 128
Boolean 1 (enable)
Boolean 0 (controller 123 only)
What it does...
This line controls whether the audio
waveform is redrawn or not when the
display is scrolling during playback. By
setting the value to 1, you can force
the Track and Audio views to always
redisplay audio data, even during
playback. This is recommended only
for very fast machines.
This line specifies whether or not Pro
Audio should jump to the foreground
(focus) once it locks to SMPTE.
This determines the location of the
Hyphenator extension DLL used by
Pro Audio, and is written during
installation. This should never need to
be changed.
Each StudioWare view remembers a
certain maximum number of (Design
mode) operations before discarding old
ones. This line lets you control the
maximum depth of each Panel undo
history. Be aware that the larger the
number you specify, the more memory
must be dedicated to storing the
information required to undo
commands.
This line controls whether Pro Audio
hides (n=0) or shows (n=1) all widget
bitmaps while in Use mode (except
those in Image widgets).
The Panic/Reset button stops playback
and turns off any stuck notes. There
are two ways a MIDI note can be
turned off: By a note-off message
(n=1) or by MIDI controller number
123 (all notes off). By default, Panic
uses controller 123 only (n=0).
E-3