Changing The Order Of Tracks - CAKEWALK PRO AUDIO User Manual

Changing the Order of Tracks

There are several ways you can change the order of tracks in the Track
view:
¥ Drag a track to a new position in the Track view.
¥ Use the Track-Sort command to rearrange the tracks in order
based on the track name, status, or other setting.
¥ Insert new, blank tracks between existing tracks.
To Drag a Track to a New Position...
1. Position the mouse over the Name column for the track you want
to move
2. Press and hold down the mouse button. The cursor changes to an
up/down arrow.
3. Drag the track to its new location, and release the mouse button.
Pro Audio rearranges and renumbers the tracks.
You can sort the tracks in a project based on several parameters, in
either ascending or descending order:
Sort by...
Name
Size, port, or channel
Muted, archived, selected
No matter how you sort, blank tracks always go to the end of the list.
Note that track numbers are used for reference only. When you re-
arrange the order of tracks, they are automatically assigned sequential
numbers based on the order in which they are displayed in the Track
view.
What happens...
Ascending puts track in alphabetic order,
descending puts them in reverse order
Ascending puts them in increasing
numeric order, descending puts them in
decreasing numeric order
Ascending puts qualifying tracks at the
end, descending puts them at the
beginning
5-3